Automotive

15 Products

View as List Grid
Set Descending Direction
per page
  1. SOLVO CLEAN 68 RAH
    SOLVO CLEAN® 68 rah is a high performance replacement for ozone depleting chlorinated solvents. It provides excellent cleaning without the detrimental impact on the environment associated with chlorinated solvents.
  2. QUAKERDRAW 58 BF
    QUAKERDRAW® 58 BF is a barium-free, water-dilutable forming lubricant consisting of Quaker’s proprietary ester lubricant, extreme pressure and anti-wear agents in combination with organic corrosion inhibitors. It is a multifunctional fluid designed for use on severe, high speed punching and/or forming operations where previously only high performance, chlorinated extreme pressure oils or emulsifiable mineral oil based products would work. This completely synthetic product is recommended for use in both soft and hard waters. This product is recommended for use on cold rolled steel, galvanized steel, and aluminum.
  3. QUAKERCUT 004 PE
    QUAKERCUT® 004 PE is designed for honing and lapping operations on alloy and carbon steel. This product is a complex formulation of controlled release extreme-pressure lubricants, boundary lubricants and high-quality virgin mineral oils. This light colored, mild odor fluid delivers excellent honing and grinding performance without sulfurized fats or chlorinated additives.
  4. QUAKERCOOL 8013
    stainless steel and ferrous applications • Superior corrosion protection on the part and machine and does not stain galvanized steelAPPLICATIONSQUAKERCOOL® 8013 is a high performance, heavy-duty synthetic metalworking fluid for use on aluminum and aerospace alloys. It is specially formulated for aluminum machining and provides superior surface finish in critical machining applications. QUAKERCOOL® 8013 can also be used on stainless steel and other alloy steels. QUAKERCOOL® 8013 is highly fortified with water-soluble lubricity and EP additives making it capable of performing equal to heavy-duty soluble oils. It provides excellent cleanability, oil rejection, bio-stability and is very low foaming even in R/O water.
  5. QUAKERCOOL 7450
    QUAKERCOOL® 7450 is a high-performance microemulsion ideally suited to all operations demanding premium surface finish quality and consistent lubrication. Ideal for machining aluminum, and ferrous alloys. Delivers superior tapping performance on 356-T6 aluminum alloy.
  6. QUAKERCOOL 740
    QUAKERCOOL® 740 is a boron-free emulsifiable metalworking fluid designed for ferrous machining and grinding operations requiring good lubricity, cleanliness, cooling and corrosion protection. It can be used on cast iron and will also perform well for moderate duty operations on steel alloys.
  7. QUAKERCLEAN 624 CP
    inventory and costsAPPLICATIONSQUAKERCLEAN® 624 CP is a dual-purpose, mild alkaline liquid that simultaneously cleans and protects metal surfaces in a single processing step. This product is designed for ferrous (steel and cast iron) alloys and non-ferrous (aluminum) alloys.QUAKERCLEAN® 624 CP will not foam and works extremely well in deburring operations with spray pressures in excess of 2,500 psi (172 BAR).CUSTOMERS • Bosch • Electro Motive Diesel • General Motors • Honda • Volvo
  8. POLY SLICK 61G
    POLY SLICK™ 61-G is a beaded, dry-form plunger lubricant designed as a high performance substitute to oil-based lubricants. This product is formulated with a unique blend of the highest quality waxes and additives for rapid wetting and excellent boundary lubrication, allowing for increased shot velocities and extended tip and sleeve life. POLY SLICK™ 61-G plunger beads create less carbon build-up than traditional oil-based plunger lubricants, resulting in cleaner die cavities and machines, along with less porosity. POLY SLICK™ 61-G contains graphite for enhanced lubrication and thermal resistance to meet the demands of your process.The amount of POLY SLICK™ 61-G applied is dependent on the size of the plunger tip and the weight of the casting produced. PACKAGING AND STORAGEPOLY SLICK™ products are available in bags, boxes, drums, and pails. All containers are filled to volume by weight.
  9. PLUNGER SLICK 180
    PLUNGER SLICK® 180 is a high viscosity blend of petroleum polymers designed to provide excellent boundary lubricantion for the plunger tip and sleeve.Apply PLUNGER SLICK® 180 to the shot tip before each casting cycle. Each die casting facility is unique. Production processes, die designs, and operation temperatures vary. Each operator should evaluate the amount applied, based on his/her experience.PLUNGER SLICK® 180 is recommended for plunger tips from 2” – 7”. This product is to be used as is. It is not water soluble.
  10. LADLE SLICK 1
    Apply with a brush uniformly coating any surface where protection is desired. Parts can be coated hot or cold. After the coating is applied the part or surface is exposed to molten alloy which removes the oil base and solidifies the coating. Touchups or small areas can be corrected during normal production. A torch or other heat source can be used if necessary.
  11. FERROCOTE 6130
    FERROCOTE 6130 is an oil-based drawing and forming lubricant that can be used for blank washing, blanking, stamping, and bending operations. FERROCOTE 6130 is designed to be applied to ferrous and non-ferrous metal surfaces in any of the aforementioned operations while offering in-process and final protection for the formed part. Meets South Coast Air Quality Management District (SCAQMD) 2012 requirements under Rule 1144, ASTM E1868-10 (TGA) for metal protecting, general (corrosion preventives). This product can be applied by: • Flood • Flow-on • Immersion • Wipe-on • Electrostatic • Spray
  12. FERROCOTE 5856 BF T1
    FERROCOTE® 5856 BF T1 is a barium-free, solventdispersed corrosion preventive providing 1-5 years of indoor protection of ferrous and non-ferrous bearing surfaces. This product is formulated with a unique balance of polar additives that provides exceptional corrosion protection. It offers excellent water displacing and fingerprint neutralization performance characteristics. Its inherent versatility offers application flexibility using spray, immersion, flood or flow-coat techniques. FERROCOTE® 5856 BF T1 is a global product extensively used for numerous industrial metalworking corrosion preventive applications.
  13. DIE SLICK ANTI SOLDER 7
    DIE SLICK® Anti-Solder 7 is a soft wax compound which removes solder from hot dies and can serve as a start up conditioner for new dies. Solder Removal: Use DIE SLICK® Anti-Solder 7 only with hot dies (> 450oF). Apply a small amount with a bronze brush or a wood spatula to the accumulated solder and the surrounding area. Apply normal spray pattern of die lubricant and conduct your casting cycle. Die Pretreatment: Raise the die temperature to 450oF, brush on a thin coat of DIE SLICK® Anti-Solder 7. Apply coating several times, allowing time for the compound to adhere to the surface of the die.
  14. DIE SLICK 2310 SYN
    DIE SLICK® 2310 SYN is a synthetic lubricant which contains a blend of reactive polymeric lubricants. The formulation incorporates Smart Polymer™ technology and high molecular weight alkane cross-linking agent. Smart Polymer™ technology is a thermodynamically reactive polymer blend which forms a tough barrier on hot areas of the die while lightly coating cooler less demanding areas. This unique property translates to reduced solder, enhanced release and wetting characteristics while producing bright and clean castings.PACKAGING AND STORAGEDIE SLICK® 2310 SYN is available in drums, totes, or pails. All containers are filled to volume by weight. This product has a shelf life of 12 months. Like most chemicals, it should be stored in a tightly sealed container in temperatures between 5°C (41°F) and 35°C (95°F). Do not freeze. To enhance process compatibility, use Quaker metalworking fluids and cleaners. Consult your Quaker representative.
  15. DIE SLICK 175
    The product contains a blend of natural materials and a unique high temperature synthetic polymer that enhances lubrication and release properties for more difficult applications. It can be diluted with water or solvent.

15 Products

View as List Grid
Set Descending Direction
per page