Die Release Agents

4 Products

View as List Grid
Set Descending Direction
per page
  1. DIE SLICK ANTI SOLDER 7G
    DIE SLICK® Anti-Solder 7 is a soft wax compound which removes solder from hot dies and can serve as a start up conditioner for new dies. Solder Removal: Use DIE SLICK® Anti-Solder 7 only with hot dies (> 450oF). Apply a small amount with a bronze brush or a wood spatula to the accumulated solder and the surrounding area. Apply normal spray pattern of die lubricant and conduct your casting cycle. Die Pretreatment: Raise the die temperature to 450oF, brush on a thin coat of DIE SLICK® Anti-Solder 7. Apply coating several times, allowing time for the compound to adhere to the surface of the die.
  2. DIE SLICK ANTI SOLDER 7
    DIE SLICK® Anti-Solder 7 is a soft wax compound which removes solder from hot dies and can serve as a start up conditioner for new dies. Solder Removal: Use DIE SLICK® Anti-Solder 7 only with hot dies (> 450oF). Apply a small amount with a bronze brush or a wood spatula to the accumulated solder and the surrounding area. Apply normal spray pattern of die lubricant and conduct your casting cycle. Die Pretreatment: Raise the die temperature to 450oF, brush on a thin coat of DIE SLICK® Anti-Solder 7. Apply coating several times, allowing time for the compound to adhere to the surface of the die.
  3. DIE SLICK 3550
    DIE SLICK® 3550 is a synthetic lubricant which contains a blend of reactive polymeric lubricants. The formulation incorporates Smart Polymer technology and a high molecular weight alkane cross-linking agent. Smart Polymer technology is a thermodynamically reactive polymer blend which forms a tough barrier on hot areas of the die, while lightly coating cooler less demanding areas. This unique property translates to reduced solder, enhanced release, and wetting characteristics while producing bright and clean castings.
  4. DIE SLICK 2310 SYN
    DIE SLICK® 2310 SYN is a synthetic lubricant which contains a blend of reactive polymeric lubricants. The formulation incorporates Smart Polymer™ technology and high molecular weight alkane cross-linking agent. Smart Polymer™ technology is a thermodynamically reactive polymer blend which forms a tough barrier on hot areas of the die while lightly coating cooler less demanding areas. This unique property translates to reduced solder, enhanced release and wetting characteristics while producing bright and clean castings.PACKAGING AND STORAGEDIE SLICK® 2310 SYN is available in drums, totes, or pails. All containers are filled to volume by weight. This product has a shelf life of 12 months. Like most chemicals, it should be stored in a tightly sealed container in temperatures between 5°C (41°F) and 35°C (95°F). Do not freeze. To enhance process compatibility, use Quaker metalworking fluids and cleaners. Consult your Quaker representative.

4 Products

View as List Grid
Set Descending Direction
per page