WOCO® HEP gear oils are premium quality
extreme pressure gear lubricants formulated with
high viscosity index base oils. These products contain
a sulfur-phosphorus additive package and do not
contain lead, possess good adhesion properties,
are non-corrosive and are foam inhibited. They
resist oxidation, are thermally stable and have good
demulsibility. WOCO® HEP gear oils are recommended for circulating, splash, bath or spray lubrication systems on enclosed gear, chain or sprocket drives.

WOCO® circulating oils are blended with premium
quality, highly refined base stocks. They have excellent
resistance to oxidation and rust and are formulated
with a unique demulsifier to enhance water
separation characteristics. WOCO® circulating oils
can be used in any application calling for a general
purpose non-antiwear lubricating oil. This product
is designed to meet or exceed Morgan Morgoil
lubricant specifications, including the Morgan “super
demulsibility” advanced lubricant specification.

PROWAY way oils are formulated using only highly
refined paraffinic base oils. They contain friction
modifying additives that provide smooth slide way
movement, or anti-stick-slip, on sliding machine
ways including planers, grinders, shapers, milling and
horizontal boring machines. PROWAY way oils have
mild EP properties, exhibit good rust prevention and
adhere strongly to sliding surfaces, minimizing wear to
slide way components.

WOCO® spindle oils are highly refined oils, carefully
selected to provide excellent water separation and
extremely low foaming tendencies over a wide
range of temperatures. They contain inhibitors for
rust, corrosion and oxidation. WOCO® spindle oils are
intended for use in high speed spinning and twister
spindle bearings. These bearings typically operate
at extremely high rpm’s and require a low viscosity,
high viscosity index oil to both lubricate and dissipate
excessive heat. WOCO® spindle oils may be used in
hydraulic systems where light viscosity oils are required

WOCO® AW hydraulic oils are fully inhibited
hydraulic oils designed for service in piston, vane or gear pumps operating at pressures over 1000 psi and/or speeds over 1200 rpm. The AW hydraulic seriescontain anti-wear, rust, oxidation and foam inhibitors, and exhibit excellent water separating characteristics. These oils meet or exceed the requirements of the pump manufacturers that do not prohibit the use of
zinc additives

WOCO® AW HD anti-wear hydraulic oils are blended with highly refined oils containing a complete additive package to provide lubrication, oxidation stability, anti-foam, and high temperature hydrolytic stability. These products are premium quality hydraulic oils formulated to meet or exceed the requirements of pump manufacturers.

WOCO® AW 4000 Series are anti-wear hydraulic
oils formulated with highly refined base stocks that are blended with an enhanced additive package to provide lubrication, oxidation stability, anti-rust, demulsibility, anti-foam and high temperature hydrolytic stability. These oils are ashless and contain no zinc.

WOCO® turbine and hydraulic oils (R&O) are highly refined distillate oils that have excellent thermal and oxidation stability, rust protection, anti-foam and demulsibility. WOCO® turbine and hydraulic oil (R&O) is recommended for turbine lubrication, machine tools, air compressors, circulating oil systems and hydraulic systems operating at less than 1000 psi and/or less
than 1200 rpm.