QUINTOLUBRIC® 807-IS is a completely synthetic, water soluble hydraulic system additive that has been specifically designed for use at 2-5% concentration in water hydraulic systems with reciprocating piston pumps. QUINTOLUBRIC® 807-IS contains proprietary lubricants, stabilizers, corrosion inhibitors, and bactericides in a ratio balanced to meet the lubrication requirements of pumps, packings, and valves. It provides effective protection against rust and micro-organism growth at the 2-5% use dilution.The proprietary lubricants in QUINTOLUBRIC® 807-IS have a strong affinity for metal, and provide effective boundary lubrication between sliding steel surfaces. The biocides used in QUINTOLUBRIC® 807-IS are effective against both bacteria and mold/yeast. The biocide package in QUINTOLUBRIC® 807-IS will protect against bacteria and fungal growth at the minimum concentration of 2%. There is plenty of reserve alkalinity in QUINTOLUBRIC® 807-IS to maintain proper pH for corrosion inhibition an
QUAKERCUT® 004 PE is designed for honing and lapping operations on alloy and carbon steel. This product is a complex formulation of controlled release extreme-pressure lubricants, boundary lubricants and high-quality virgin mineral oils. This light colored, mild odor fluid delivers excellent honing and grinding performance without sulfurized fats or chlorinated additives.
QUAKERDRAW® 58 BF is a barium-free, water-dilutable forming lubricant consisting of Quaker’s proprietary ester lubricant, extreme pressure and anti-wear agents in combination with organic corrosion inhibitors. It is a multifunctional fluid designed for use on severe, high speed punching and/or forming operations where previously only high performance, chlorinated extreme pressure oils or emulsifiable mineral oil based products would work. This completely synthetic product is recommended for use in both soft and hard waters. This product is recommended for use on cold rolled steel, galvanized steel, and aluminum.
QUAKERCUT® 030 ES is designed for difficult machining and grinding operations requiring a high degree of lubrication. It was engineered to provide optimum performance on difficult operations, such as broaching and gear cutting, and on difficult to machine alloys, such as exotic high nickel aerospace alloys. This product is also suitable for use on steelCURRENT CUSTOMERS • TRWCLEANING AND PROTECTINGTo clean and protect, after the metal removal operation, use QUAKERCLEAN® (cleaners) and FERROCOTE® (corrosion preventives) to enhance process compatibility. Consult your Quaker representative.
Binol Band 20 is a safe and environmentally acceptable non-emulsifying cleaning oil, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free. Binol Band 20 is designed for cleaning and lubricating applications of band saws, circular saws in saw mills and tables and cutter tools in planing mills. The product has been tested against different elastomers and paints, used by the leading equipment manufacturers. Binol Band 20 reduces consumption, extends the abrasive range of the bandsaw blades and is an environmentally acceptable alternative to diesel oil.
FERROCOTE 6130 is an oil-based drawing and forming lubricant that can be used for blank washing, blanking, stamping, and bending operations. FERROCOTE 6130 is designed to be applied to ferrous and non-ferrous metal surfaces in any of the aforementioned operations while offering in-process and final protection for the formed part. Meets South Coast Air Quality Management District (SCAQMD) 2012 requirements under Rule 1144, ASTM E1868-10 (TGA) for metal protecting, general (corrosion preventives). This product can be applied by: • Flood • Flow-on • Immersion • Wipe-on • Electrostatic • Spray
QUAKERCUT® 012 PE is designed for medium to heavy-duty machining and grinding operations requiring a high degree of lubrication. It is suitable for use on all grades of steel, especially difficult-to-machine high-nickel alloys. FLUID MAINTENANCEQUAKERCUT® 012 PE is to be used as received. It should not be diluted with any mineral spirits or other low viscosity materials. Dilution will greatly hinder performance characteristics. Please consult with your Quaker Process Engineer for more information.