All Products

14 Products

View as List Grid
Set Descending Direction
per page
Filter
  1. BINOL BAND 20
    Binol Band 20 is a safe and environmentally acceptable non-emulsifying cleaning oil, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free. Binol Band 20 is designed for cleaning and lubricating applications of band saws, circular saws in saw mills and tables and cutter tools in planing mills. The product has been tested against different elastomers and paints, used by the leading equipment manufacturers. Binol Band 20 reduces consumption, extends the abrasive range of the bandsaw blades and is an environmentally acceptable alternative to diesel oil.
  2. BINOL BAND 5
    Binol Band 5 is a safe and environmentally acceptable non-emulsifying cleaning oil, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free. Binol Band 5 is designed for cleaning and lubricating applications of band saws, circular saws in saw mills and tables and cutter tools in planing mills. The product has been tested against different elastomers and paints, used by the leading equipment manufacturers. Binol Band 5 reduces consumption, extends the abrasive range of the bandsaw blades and is an environmentally acceptable alternative to diesel oil.
  3. FERROCOTE 61 A US
    This oil-based rust preventive provides in-process or final protection for medium to long-term indoor storage of metal surfaces.Meets South Coast Air Quality Management District (SCAQMD) 2012 requirements under Rule 1144 (ASTM E1868-10 TGA).\n • Flood\n • Flow-on\n • Immersion\n • Wipe-on\n • Electrostatic
  4. QUAKERAL 481 V
    This emulsifiable metalworking fluid is designed for machining and grinding operations on cast and wrought aluminum, as well as, more difficult machining and grinding operations on cast iron and steel. This Quaker technology is a more economical alternative to Quaker’s premium product line, the QUAKERAL® 300 series. QUAKERAL® 481 V is designed to control microbiological growth, including Mycobacteria, when used and maintained at the recommended concentration. QUAKERAL® 481 V has been designed for systems that have medium to hard water conditions.
  5. QUAKERCOOL 2780
    QUAKERCOOL® 2780 machining and grinding fluid, provides a high degree of lubrication, cleanliness, cooling, and corrosion protection. It is suitable for use on difficult operations involving high alloy steel, carbon steel, and cast iron. This oil-free synthetic coolant also provides effective lubrication for many aluminum operations. • Medium to Heavy Duty Machining • Multipurpose Grinding • Vitrified CBN GrindingCUSTOMERS • Bosch Automotive • Caterpillar, Inc. • Delphi Automotive • Honeywell • Pratt & Whitney • Sikorsky Aircraft
  6. QUAKERCOOL 6010 ND
    This Boeing-approved product is designed as a multi-purpose machining and grinding coolant for use on operations requiring a high degree of cleanliness, detergency, cooling, and corrosion protection. It is suitable for use on steel, cast iron, difficult steel alloys, and almost all non-ferrous alloys. Meets South Coast Air Quality Management District (SCAQMD) 2012 requirements under Rule 1144 (ASTM E1868-10 TGA).CURRENT CUSTOMERS\n • Boeing\n • Boeing sub contractors
  7. QUAKERCOOL 740
    QUAKERCOOL® 740 is a boron-free emulsifiable metalworking fluid designed for ferrous machining and grinding operations requiring good lubricity, cleanliness, cooling and corrosion protection. It can be used on cast iron and will also perform well for moderate duty operations on steel alloys.
  8. QUAKERCOOL 7450
    QUAKERCOOL® 7450 is a high-performance microemulsion ideally suited to all operations demanding premium surface finish quality and consistent lubrication. Ideal for machining aluminum, and ferrous alloys. Delivers superior tapping performance on 356-T6 aluminum alloy.
  9. QUAKERCOOL 750
    The QUAKERCOOL® 750 high-performance, mineral oil free microemulsion metalworking fluid is a proven performer in demanding ferrous machining and grinding operations.
  10. QUAKERCOOL 8013
    stainless steel and ferrous applications\n • Superior corrosion protection on the part and machine and does not stain galvanized steelAPPLICATIONSQUAKERCOOL® 8013 is a high performance, heavy-duty synthetic metalworking fluid for use on aluminum and aerospace alloys. It is specially formulated for aluminum machining and provides superior surface finish in critical machining applications. QUAKERCOOL® 8013 can also be used on stainless steel and other alloy steels. QUAKERCOOL® 8013 is highly fortified with water-soluble lubricity and EP additives making it capable of performing equal to heavy-duty soluble oils. It provides excellent cleanability, oil rejection, bio-stability and is very low foaming even in R/O water.
  11. QUAKERCUT 012 PE
    QUAKERCUT® 012 PE is designed for medium to heavy-duty machining and grinding operations requiring a high degree of lubrication. It is suitable for use on all grades of steel, especially difficult-to-machine high-nickel alloys. FLUID MAINTENANCEQUAKERCUT® 012 PE is to be used as received. It should not be diluted with any mineral spirits or other low viscosity materials. Dilution will greatly hinder performance characteristics. Please consult with your Quaker Process Engineer for more information.
  12. QUAKERCUT 026 PE
    This medium to heavy-duty machining and grinding oil provides a high degree of lubrication. It is suitable for use on all grades of steel, including difficult to machine high-nickel alloys. This product contains a synthetic ester and a unique non-sulfurized & non-chlorinated extreme pressure additive.\n • Medium to Heavy Duty Machining\n • Tapping\n • Plated CBN Grinding\n • Gun DrillingCLEANING AND PROTECTINGTo clean and protect after the metal removal operation, use QUAKERCLEAN® (cleaners) and FERROCOTE® (corrosion preventives) to enhance process compatibility.
  13. QUAKERCUT 030 ES
    QUAKERCUT® 030 ES is designed for difficult machining and grinding operations requiring a high degree of lubrication. It was engineered to provide optimum performance on difficult operations, such as broaching and gear cutting, and on difficult to machine alloys, such as exotic high nickel aerospace alloys. This product is also suitable for use on steelCURRENT CUSTOMERS\n • TRWCLEANING AND PROTECTINGTo clean and protect, after the metal removal operation, use QUAKERCLEAN® (cleaners) and FERROCOTE® (corrosion preventives) to enhance process compatibility. Consult your Quaker representative.

14 Products

View as List Grid
Set Descending Direction
per page