- ADDITIVE AMPADDITIVE AMP is designed for increasing the pH of water soluble metalworking fluids in solution or emulsion.ADDITIVE AMP is to be used diluted into water. Always add product to water to assure the best mixing and minimize any localized exotherms.This additive is used in increments of 1 gallon of additive into each 10,000 gallons of metalworking emulsion or solution until desired increase in pH is achieved. Allow the additive to mix well into the aqueous fluid and re-check pH before making more additions.
- FERROCOTE EGL 1FERROCOTE® EGL 1 is an oil dispersed rust preventive providing medium to long term indoor protection of ferrous and non-ferrous surfaces. This product provides high humidity protection and has built-in protection against acidic components in normal industrial atmospheres. FERROCOTE® EGL 1 has excellent resistance to staining and varnishing on storage on metal-to-metal contact, especially with moisture contamination present. This property has provided excellent resistance to ”puddle stain“ when used as slushing oil for sheets and coils, including cold rolled and galvanize in the steel industry.
- QUAKERAL 481 VThis emulsifiable metalworking fluid is designed for machining and grinding operations on cast and wrought aluminum, as well as, more difficult machining and grinding operations on cast iron and steel. This Quaker technology is a more economical alternative to Quaker’s premium product line, the QUAKERAL® 300 series. QUAKERAL® 481 V is designed to control microbiological growth, including Mycobacteria, when used and maintained at the recommended concentration. QUAKERAL® 481 V has been designed for systems that have medium to hard water conditions.
- QUAKERCLEAN 624 CPinventory and costsAPPLICATIONSQUAKERCLEAN® 624 CP is a dual-purpose, mild alkaline liquid that simultaneously cleans and protects metal surfaces in a single processing step. This product is designed for ferrous (steel and cast iron) alloys and non-ferrous (aluminum) alloys.QUAKERCLEAN® 624 CP will not foam and works extremely well in deburring operations with spray pressures in excess of 2,500 psi (172 BAR).CUSTOMERS\n • Bosch\n • Electro Motive Diesel\n • General Motors\n • Honda\n • Volvo
- QUAKERCLEAN 624 JBSQUAKERCLEAN® 624 JBS is a mild alkaline liquid that simultaneously cleans and protects metal surfaces in a single processing step. This product is designed for ferrous (steel and cast iron) alloys and non-ferrous (aluminum) alloys. CORPORATE APPROVALS\n • CORPORATE APPROVALS\n • Caterpillar # 3-9837336\n • Chrysler NPM # 12-270-6050\n • Ford TOX # 175019\n • General Motors HMCS ID 1182432
- QUAKERCLEAN 624 MPCQUAKERCLEAN® 624 MPC is a dual-purpose mild alkaline liquid that simultaneously cleans and protects metal surfaces in a single processing step. This product is designed for ferrous (steel and cast iron) alloys and non-ferrous (aluminum) alloys. Unique chemical engineering allows this product to offer the additional benefits of non-foaming with application pressures in excess of 2,500 psi and excellent oil-splitting characteristics.
- QUAKERCOOL 2780QUAKERCOOL® 2780 machining and grinding fluid, provides a high degree of lubrication, cleanliness, cooling, and corrosion protection. It is suitable for use on difficult operations involving high alloy steel, carbon steel, and cast iron. This oil-free synthetic coolant also provides effective lubrication for many aluminum operations. • Medium to Heavy Duty Machining • Multipurpose Grinding • Vitrified CBN GrindingCUSTOMERS • Bosch Automotive • Caterpillar, Inc. • Delphi Automotive • Honeywell • Pratt & Whitney • Sikorsky Aircraft
- QUAKERCOOL 6010 NDThis Boeing-approved product is designed as a multi-purpose machining and grinding coolant for use on operations requiring a high degree of cleanliness, detergency, cooling, and corrosion protection. It is suitable for use on steel, cast iron, difficult steel alloys, and almost all non-ferrous alloys. Meets South Coast Air Quality Management District (SCAQMD) 2012 requirements under Rule 1144 (ASTM E1868-10 TGA).CURRENT CUSTOMERS\n • Boeing\n • Boeing sub contractors
- QUAKERCOOL 740QUAKERCOOL® 740 is a boron-free emulsifiable metalworking fluid designed for ferrous machining and grinding operations requiring good lubricity, cleanliness, cooling and corrosion protection. It can be used on cast iron and will also perform well for moderate duty operations on steel alloys.
- QUAKERCOOL 7450QUAKERCOOL® 7450 is a high-performance microemulsion ideally suited to all operations demanding premium surface finish quality and consistent lubrication. Ideal for machining aluminum, and ferrous alloys. Delivers superior tapping performance on 356-T6 aluminum alloy.
- QUAKERCOOL 8013stainless steel and ferrous applications\n • Superior corrosion protection on the part and machine and does not stain galvanized steelAPPLICATIONSQUAKERCOOL® 8013 is a high performance, heavy-duty synthetic metalworking fluid for use on aluminum and aerospace alloys. It is specially formulated for aluminum machining and provides superior surface finish in critical machining applications. QUAKERCOOL® 8013 can also be used on stainless steel and other alloy steels. QUAKERCOOL® 8013 is highly fortified with water-soluble lubricity and EP additives making it capable of performing equal to heavy-duty soluble oils. It provides excellent cleanability, oil rejection, bio-stability and is very low foaming even in R/O water.
- QUAKERCUT 012 PEQUAKERCUT® 012 PE is designed for medium to heavy-duty machining and grinding operations requiring a high degree of lubrication. It is suitable for use on all grades of steel, especially difficult-to-machine high-nickel alloys. FLUID MAINTENANCEQUAKERCUT® 012 PE is to be used as received. It should not be diluted with any mineral spirits or other low viscosity materials. Dilution will greatly hinder performance characteristics. Please consult with your Quaker Process Engineer for more information.
- QUAKERCUT 026 PEThis medium to heavy-duty machining and grinding oil provides a high degree of lubrication. It is suitable for use on all grades of steel, including difficult to machine high-nickel alloys. This product contains a synthetic ester and a unique non-sulfurized & non-chlorinated extreme pressure additive.\n • Medium to Heavy Duty Machining\n • Tapping\n • Plated CBN Grinding\n • Gun DrillingCLEANING AND PROTECTINGTo clean and protect after the metal removal operation, use QUAKERCLEAN® (cleaners) and FERROCOTE® (corrosion preventives) to enhance process compatibility.
- QUAKERCUT 030 ESQUAKERCUT® 030 ES is designed for difficult machining and grinding operations requiring a high degree of lubrication. It was engineered to provide optimum performance on difficult operations, such as broaching and gear cutting, and on difficult to machine alloys, such as exotic high nickel aerospace alloys. This product is also suitable for use on steelCURRENT CUSTOMERS\n • TRWCLEANING AND PROTECTINGTo clean and protect, after the metal removal operation, use QUAKERCLEAN® (cleaners) and FERROCOTE® (corrosion preventives) to enhance process compatibility. Consult your Quaker representative.