All Products

4 Products

View as List Grid
Set Descending Direction
per page
Filter
  1. FERROCOTE 5856 BF T1
    FERROCOTE® 5856 BF T1 is a barium-free, solventdispersed corrosion preventive providing 1-5 years of indoor protection of ferrous and non-ferrous bearing surfaces. This product is formulated with a unique balance of polar additives that provides exceptional corrosion protection. It offers excellent water displacing and fingerprint neutralization performance characteristics. Its inherent versatility offers application flexibility using spray, immersion, flood or flow-coat techniques. FERROCOTE® 5856 BF T1 is a global product extensively used for numerous industrial metalworking corrosion preventive applications.
  2. FERROCOTE 61 MAL HCL 1
    FERROCOTE® 61 MAL HCL 1 is a flexing, blank washing, blanking, stamping, and drawing lubricant. This product is a lubricant-rust preventive that is designed to be applied to sheet steel and/or blanks in any of the aforementioned operations.FLUID MAINTENANCEThis product is used as received. It should not be diluted with any type of solvent or oil. Dilution will significantly reduce its performance and quality. Concentration control is not an issue with this product because it is used as received. Please consult your Quaker representative for more information on proper fluid maintenance.
  3. QUAKERDRAW 58 BF
    QUAKERDRAW® 58 BF is a barium-free, water-dilutable forming lubricant consisting of Quaker’s proprietary ester lubricant, extreme pressure and anti-wear agents in combination with organic corrosion inhibitors. It is a multifunctional fluid designed for use on severe, high speed punching and/or forming operations where previously only high performance, chlorinated extreme pressure oils or emulsifiable mineral oil based products would work. This completely synthetic product is recommended for use in both soft and hard waters. This product is recommended for use on cold rolled steel, galvanized steel, and aluminum. \n
  4. QUINTOLUBRIC 888 68
    QUINTOLUBRIC® 888-68 was designed to replace anti-wear, mineral oil-based hydraulic fluids used in applications where fire hazards exist. QUINTOLUBRIC® 888-68 can also be used in environmentally sensitive hydraulic applications without compromising the overall hydraulic system operations. This fluid does not contain water, mineral oil, or phosphate ester, and is based on high-quality, synthetic, organic esters and carefully selected additives to achieve excellent hydraulic fluid performance. QUINTOLUBRIC® 888-68 offers the lubrication level of premium, anti-wear hydraulic oils, and can be used with hydraulic components from all major manufacturers.

4 Products

View as List Grid
Set Descending Direction
per page