All Products

138 Products

View as List Grid
Page
Set Descending Direction
per page
  1. DIE SLICK 30
    DIE SLICK® 30 is an excellent synthetic emulsion formulated for die casting operations that require no staining and high heat tolerations. This product contains a unique component that enhances wetting and lubrication characteristics without sacrificing its high heat tolerance.
  2. DIE SLICK 56
    DIE SLICK® 56 is a concentrated semi-synthetic emulsion formulated to minimize residue buildup on the die parting face without sacrificing performance. It contains a unique blend of natural and synthetic components that enhance its lubrication and release properties.
  3. DIE SLICK 606X
    DIE SLICK® 606X is a concentrated die lubricant that is often used in its concentrated form on areas that have a high probability of soldering. It contains graphite and aluminum pigments that withstand the heat and allow trouble free release. It also contains a synthetic polymer that promotes better adhesion of the die lubricant.
  4. DIE SLICK 7000NW
    DIE SLICK® 7000NW is a concentrated wax free semi-synthetic emulsion formulated to minimize residue buildup on the die parting face without sacrificing performance. It contains a unique blend of natural and synthetic components that enhance its lubrication and release properties.
  5. DIE SLICK 77
    DIE SLICK 77 is a high temperature lubricant developed specifically for use on ejector pins and other moving parts of the die. DIE SLICK 77 will not gum or carbonize at extreme temperatures assuring continuous free movement of sliding parts.
  6. DIE SLICK ANTI SOLDER 7
    DIE SLICK® Anti-Solder 7 is a soft wax compound which removes solder from hot dies and can serve as a start up conditioner for new dies. Solder Removal: Use DIE SLICK® Anti-Solder 7 only with hot dies (> 450oF). Apply a small amount with a bronze brush or a wood spatula to the accumulated solder and the surrounding area. Apply normal spray pattern of die lubricant and conduct your casting cycle. Die Pretreatment: Raise the die temperature to 450oF, brush on a thin coat of DIE SLICK® Anti-Solder 7. Apply coating several times, allowing time for the compound to adhere to the surface of the die.
  7. DUSTGRIP 1000
    DUSTGRIP™ 1000 is an easy-to-use dust management tool, which provides durable control and suppression of dust caused by wind, vehicle and heavy equipment traffic. This product is safe and easy to use, with no special equipment required. Its unique properties effectively control and suppress fugitive dust emissions in areas such as haul/unpaved roads, construction sites and quarries. Other areas where dust may be a problem include recreational areas with unpaved parking lots and roadways.Regulations regarding the reduction of particulate dust are playing an increasingly important role in helping to ensure that communities are not exposed to unacceptable levels of inhalable or respirable dust. DUSTGRIP™ 1000 dust suppressant assists in managing an economical, environmentally responsible and effective solution.
  8. DUSTGRIP SUPERTAC
    DUSTGRIP® SUPER TAC is an easy-to-use dust PRmanagement tool, which provides durable control and suppression of dust caused by wind, vehicle and Apheavy equipment traffic. This product is safe and easy Typto use, with no special equipment required. Its unique Kinproperties effectively control and suppress fugitive dust emissions in areas such as haul/unpaved roads, Spconstruction sites and quarries. Other areas where Stodust may be a problem include recreational areas Frewith unpaved parking lots and roadways. DUSTGRIP® FlaSUPER TAC is well suited for dry to moderately rainy Solclimates. The formula has the ability to retain moisture and rehydrolize after initial application. Regulations regarding the reduction of particulate dust are playing an increasingly important role in helping to ensure that communities are not exposed to unacceptable levels of inhalable or respirable dust. DUSTGRIP® SUPER TAC dust suppressant assists in managing an economical, environmentally responsible and effective solution.
  9. FERROCOTE 112 DT
    FERROCOTE® 112 DT is a water-soluble rust preventive that deposits a thin, oily-type film. This product makes a slightly meta-stable emulsion, ideal for dip tank applications.STORAGE AND HANDLINGFERROCOTE® 112 DT is available in drums (54 gal/416 lb) or totes (320 gal/2,464 lb). All containers are filled to volume by weight.This product has a shelf life of 12 months. Like most chemicals, it should be stored out of direct sunlight in temperatures between 40oF (4oC) and 100oF (38oC).
  10. FERROCOTE 112 LVX
    FERROCOTE 112 LVX is an oil-dispersed corrosion preventive that can be diluted with water, solvent or oil to yield a thin film with up to 6 months of indoor protection for ferrous and non-ferrous metals. FERROCOTE 112 LVX combines the excellent corrosion protection of an oil with the environmental benefits of a water-based, solvent-free product. Its inherent properties allow for flexibility of application using a multitude of standard techniques such as spray, immersion, flow-on and flooding.

138 Products

View as List Grid
Page
Set Descending Direction
per page