All Products

18 Products

View as List Grid
Set Descending Direction
per page
Filter
  1. FERROCOTE 61 MAL HCL 1
    FERROCOTE® 61 MAL HCL 1 is a flexing, blank washing, blanking, stamping, and drawing lubricant. This product is a lubricant-rust preventive that is designed to be applied to sheet steel and/or blanks in any of the aforementioned operations.FLUID MAINTENANCEThis product is used as received. It should not be diluted with any type of solvent or oil. Dilution will significantly reduce its performance and quality. Concentration control is not an issue with this product because it is used as received. Please consult your Quaker representative for more information on proper fluid maintenance.
  2. QUAKERCLEAN 624 LX
    QUAKERCLEAN® 624 LX is an aggressive cleaner specifically formulated for central systems, single machines, or premix tanks filled with machining and grinding fluids. With a unique balance of constituents, this product is designed to penetrate, loosen, lift, and emulsify a variety of tenacious soils. When used as recommended, QUAKERCLEAN® 624 LX will also sanitize the system. Use at 1-2% depending on the amount of dirt to be removed.CUSTOMERS\n • AK Tube\n • Bosch\n • Chrysler\n • Crown, Cork & Seal\n • General Motors\n • Honda\n • Magna\n • Silgan Can\n • Tenneco\n • Texas Machining Enterprises
  3. QUAKERCLEAN LFE 2S
    QUAKERCLEAN® LFE 2S is a liquid alkaline cleaner, designed to remove a variety of soils from ferrous surfaces. It is designed to split oil which extends the useful life of the cleaning solution. QUAKERCLEAN® LFE 2S will also effectively remove oil and grease from automotive and locomotive parts. This product will effectively remove oil and grease from automotive parts. Its unique chemical balance provides very efficient penetrating, loosening and lifting of various soils from the surface. It can be used in both spray and immersion cleaning systems. QUAKERCLEAN® LFE 2S is free rinsing and leaves a residue-free surface. It provides very little corrosion protection and should be followed by further processing or the application of a Quaker corrosion preventive.
  4. QUAKERDRAW 58 BF
    QUAKERDRAW® 58 BF is a barium-free, water-dilutable forming lubricant consisting of Quaker’s proprietary ester lubricant, extreme pressure and anti-wear agents in combination with organic corrosion inhibitors. It is a multifunctional fluid designed for use on severe, high speed punching and/or forming operations where previously only high performance, chlorinated extreme pressure oils or emulsifiable mineral oil based products would work. This completely synthetic product is recommended for use in both soft and hard waters. This product is recommended for use on cold rolled steel, galvanized steel, and aluminum. \n
  5. QUAKERDRAW CH 1000
    QUAKERDRAW CH 1000 is formulated to be a ”cost effective“ alternative to more expensive lubricants used in cold forging and heading. QUAKERDRAW CH 1000 offers high performance without the use of chlorine and has been designed for use with both regular and alloy-coated tooling. It is suitable for multiple stage operations.
  6. QUAKEROL 155 BIO JM
    QUAKER QUAKEROL 155 BIO JM is a chemically processed formulation. QUAKER QUAKEROL 155 BIO JM consists of unique, high film strength synthetic lubricating ingredients in combination with surfactants and corrosion inhibitors. QUAKER QUAKEROL 155 BIO JM is recommended for difficult tinplate can forming operations requiring maximum detergency, cooling and cleaning capability. For normal can forming operations, QUAKER QUAKEROL 155 BIO JM is designed to be used at 3 - 4% concentration in the bodymaker.

18 Products

View as List Grid
Set Descending Direction
per page