All Products

37 Products

View as List Grid
Page
Set Descending Direction
per page
Filter
  1. ADDITIVE AMP
    ADDITIVE AMP is designed for increasing the pH of water soluble metalworking fluids in solution or emulsion.ADDITIVE AMP is to be used diluted into water. Always add product to water to assure the best mixing and minimize any localized exotherms.This additive is used in increments of 1 gallon of additive into each 10,000 gallons of metalworking emulsion or solution until desired increase in pH is achieved. Allow the additive to mix well into the aqueous fluid and re-check pH before making more additions.
  2. KATHON 886 MW
    KATHON 886 MW is a powerful anti-microbial compound, which can be used as an additive in aqueous metalworking fluids. This product offers excellent microbiological protection at use rates of 55-125 ppm on a post-add basis.
  3. QUAKER ADDITIVE 4705
    This additive is designed for defoaming of water soluble metalworking fluids. This applies to soluble oils, solution synthetics and semi-synthetics. It provides effective control at a very cost competitive level. This additive is an organically modified silicone emulsion.
  4. QUAKERAL 481 V
    This emulsifiable metalworking fluid is designed for machining and grinding operations on cast and wrought aluminum, as well as, more difficult machining and grinding operations on cast iron and steel. This Quaker technology is a more economical alternative to Quaker’s premium product line, the QUAKERAL® 300 series. QUAKERAL® 481 V is designed to control microbiological growth, including Mycobacteria, when used and maintained at the recommended concentration. QUAKERAL® 481 V has been designed for systems that have medium to hard water conditions.
  5. QUAKERCLEAN 624 LX
    QUAKERCLEAN® 624 LX is an aggressive cleaner specifically formulated for central systems, single machines, or premix tanks filled with machining and grinding fluids. With a unique balance of constituents, this product is designed to penetrate, loosen, lift, and emulsify a variety of tenacious soils. When used as recommended, QUAKERCLEAN® 624 LX will also sanitize the system. Use at 1-2% depending on the amount of dirt to be removed.CUSTOMERS\n • AK Tube\n • Bosch\n • Chrysler\n • Crown, Cork & Seal\n • General Motors\n • Honda\n • Magna\n • Silgan Can\n • Tenneco\n • Texas Machining Enterprises
  6. QUAKERCOOL 2780
    QUAKERCOOL® 2780 machining and grinding fluid, provides a high degree of lubrication, cleanliness, cooling, and corrosion protection. It is suitable for use on difficult operations involving high alloy steel, carbon steel, and cast iron. This oil-free synthetic coolant also provides effective lubrication for many aluminum operations. • Medium to Heavy Duty Machining • Multipurpose Grinding • Vitrified CBN GrindingCUSTOMERS • Bosch Automotive • Caterpillar, Inc. • Delphi Automotive • Honeywell • Pratt & Whitney • Sikorsky Aircraft

37 Products

View as List Grid
Page
Set Descending Direction
per page